The recommended PCB layout and land pattern for the AQ3130-01ETG can be found in the Littelfuse application note AN10007. It provides guidelines for optimal PCB design, including pad sizes, spacing, and thermal considerations.
The AQ3130-01ETG has built-in overvoltage protection (OVP) and overcurrent protection (OCP) features. In the event of an overvoltage condition, the device will limit the output voltage to prevent damage. Similarly, if an overcurrent condition is detected, the device will reduce the output current to prevent damage.
The AQ3130-01ETG should be stored in a dry, cool place, away from direct sunlight and moisture. It is recommended to handle the device by the body, rather than the leads, to prevent damage. Additionally, it is recommended to use anti-static wrist straps and mats when handling the device to prevent electrostatic discharge (ESD) damage.
The AQ3130-01ETG is rated for operation up to 125°C. However, it is recommended to derate the device's performance at higher temperatures to ensure reliable operation. Consult the datasheet and application notes for more information on thermal considerations.
The typical lead time for the AQ3130-01ETG is 8-12 weeks, and the minimum order quantity (MOQ) is 1,000 pieces. However, these values may vary depending on the region, distributor, and availability. It is recommended to check with authorized distributors or Littelfuse Inc. for the most up-to-date information.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AQ3130-01ETG Overview
Use the download button to access the AQ3130-01ETG schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AQ313,
or try a keyword search, such as Transient Suppressors
