Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AQG12112 - Panasonic

Description: Solid State Relays - PCB Mount 1A 12V Zero Cross

Download AQG12112 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AQG12112 - Panasonic - PCB symbol
click to zoom
PCB Footprints
AQG12112 - Panasonic PCB footprint - Other - Other - AQG12112-1
click to zoom
3D Models
AQG12112 - Panasonic - 3D model - Other - AQG12112-1
click to zoom

AQG12112 Details

  • Manufacturer Part Number:

    AQG12112

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • HTS Code:

    8541.40.95.00

  • Factory Lead Time:

    14 Weeks

  • Manufacturer:

    Panasonic Electronic Components

  • YTEOL:

    5.64

  • Additional Feature:

    UL RECOGNIZED, VDE APPROVED

  • Configuration:

    SINGLE

  • Control Voltage:

    1 V

  • Input Type:

    DC

  • Isolation Voltage-Max:

    3000 V

  • Number of Elements:

    1

  • On-State Current-Max:

    1 A

  • Operating Temperature-Max:

    80 °C

  • Operating Temperature-Min:

    -30 °C

  • Optoelectronic Device Type:

    TRIGGER OUTPUT SSR

  • Output Circuit Type:

    Triac

  • Overall Height:

    13.5 mm

  • Overall Length:

    24.5 mm

  • Packing Method:

    BOX

AQG12112 Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the signal traces short and away from noise sources. Use a 10nF decoupling capacitor between VCC and GND near the IC.
  • Use a soft-start circuit to ramp up the power supply voltage to prevent inrush currents. Ensure the power supply voltage is stable and within the recommended range (2.7V to 5.5V) before applying it to the AQG12112.
  • The maximum allowable voltage on the digital input pins is VCC + 0.5V. Exceeding this voltage may cause damage to the IC.
  • Use a buffer amplifier or an op-amp to condition the analog output signals. Ensure the output pins are not loaded with a impedance lower than 1kΩ to prevent signal degradation.
  • The recommended operating temperature range for the AQG12112 is -40°C to 85°C. Operating outside this range may affect the IC's performance and reliability.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AQG12112 Overview

Use the download button to access the AQG12112 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AQG12, or try a keyword search, such as Solid State Relays

Parts related to AQG12112

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑