AR0134CSSM00SUEA0-DPBR1 footprint, schematic symbol and 3D model by onsemi

Symbol

PCB Footprints

3D Models

AR0134CSSM00SUEA0-DPBR1 Details

Manufacturer Part Number:
AR0134CSSM00SUEA0-DPBR1
Brand Name:
onsemi
Pbfree Code:
Yes
Part Life Cycle Code:
Obsolete
Part Package Code:
IBGA-63
Package Description:
IBGA-63
Manufacturer Package Code:
503AG
Reach Compliance Code:
Compliant
Country Of Origin:
Taiwan
Factory Lead Time:
69 Weeks
Manufacturer:
onsemi
YTEOL:
0
Additional Feature:
ELECTRONIC ROLLING SHUTTER, IT ALSO OPERATES AT ANALOG SUPPLY VOLTAGE 2.5-3.1V
Array Type:
SINGLE FRAME
Body Breadth:
9 mm
Body Height:
1.4 mm
Body Length or Diameter:
9 mm
Data Rate:
700 Mbps
Dynamic Range:
64 dB
Frame Rate:
60 fps
Horizontal Pixel:
1280
JESD-609 Code:
e1
Master Clock:
50 MHz
Mounting Feature:
SURFACE MOUNT
Operating Current-Max:
60 mA
Operating Temperature-Max:
70 °C
Operating Temperature-Min:
-30 °C
Optical Format:
1/3 inch
Output Interface Type:
2-WIRE INTERFACE
Output Range:
0.40-2.5V
Output Type:
DIGITAL CURRENT
Package Shape/Style:
SQUARE
Pixel Size:
3.75 µm
Sensors/Transducers Type:
IMAGE SENSOR,CMOS
Spectral Response (nm):
350-1100
Supply Voltage-Max:
1.95 V
Supply Voltage-Min:
1.7 V
Surface Mount:
YES
Terminal Finish:
Tin/Silver/Copper (Sn/Ag/Cu)
Termination Type:
SOLDER
Vertical Pixel:
960

The recommended PCB layout and thermal management guidelines can be found in the onsemi application note AND9313/D, which provides detailed information on PCB design, thermal management, and layout considerations to ensure optimal performance and reliability.
To optimize the AR0134CSSM00SUEA0-DPBR1 for low-light conditions, it is recommended to adjust the exposure time, gain, and black level calibration. Additionally, using a lens with a high f-number and optimizing the sensor's analog gain can also improve low-light performance.
The maximum clock frequency for the AR0134CSSM00SUEA0-DPBR1 is 72 MHz, as specified in the datasheet. However, it is recommended to consult with onsemi's technical support team for specific clocking requirements and optimization.
Image correction and processing for the AR0134CSSM00SUEA0-DPBR1 can be implemented using onsemi's ISP (Image Signal Processing) software development kit (SDK) or third-party ISP solutions. The SDK provides a range of image processing algorithms and tools to optimize image quality.
The recommended power-up and power-down sequence for the AR0134CSSM00SUEA0-DPBR1 is specified in the datasheet and should be followed to ensure proper operation and prevent damage to the device.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AR0134CSSM00SUEA0-DPBR1 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AR013, or try a keyword search, such as Image Sensors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →