Part Image

AR0233ATSC17XUEA1-DRBR - onsemi

Description: 3.0 µm Dual Conversion Gain BSI Pixel Technology; Multi−Exposure Mode for >140d B High Dynamic Range; Full Resolution LED Flicker Mitigation with 120 dB High Dynamic Range; Low−noise, low−power analog architecture; Generation−3 Motion Compensation; Adaptive Noise Reduction Filter; Advanced Context Switching; 4−lane MIPI CSI−2 Interface; >95 dB dynamic range from one exposure; ASIL−B safety design, ISO26262 compliant; 2048 x 1280 at 45 Frames per Second; 1920 x 1080 at 60 Frames per Second

Download AR0233ATSC17XUEA1-DRBR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
AR0233ATSC17XUEA1-DRBR - onsemi  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

AR0233ATSC17XUEA1-DRBR Details

  • Manufacturer Part Number:

    AR0233ATSC17XUEA1-DRBR

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    IBGA-80

  • Package Description:

    IBGA-80

  • Manufacturer Package Code:

    503BT

  • Factory Lead Time:

    35 Weeks

  • Manufacturer:

    onsemi

  • YTEOL:

    7

  • Additional Feature:

    ISO-26262; ELECTRONIC SHUTTER; ROLLING SHUTTER

  • Array Type:

    FRAME

  • Dynamic Range:

    140 dB

  • Frame Rate:

    60 fps

  • Horizontal Pixel:

    2048

  • Housing:

    PLASTIC/EPOXY

  • Mounting Feature:

    SURFACE MOUNT

  • Optical Format:

    1/2.5 inch

  • Output Interface Type:

    MIPI

  • Output Type:

    DIGITAL OUTPUT

  • Pixel Size:

    3X3 µm

  • Sensors/Transducers Type:

    IMAGE SENSOR,CMOS

  • Surface Mount:

    YES

  • Termination Type:

    SOLDER

  • Vertical Pixel:

    1280

AR0233ATSC17XUEA1-DRBR Frequently Asked Questions (FAQs)

  • Onsemi provides a recommended PCB layout and thermal management guide in their application note AN5191, which includes guidelines for thermal pad connection, PCB layer stackup, and heat sink design.
  • To optimize the sensor's performance in low-light conditions, adjust the exposure time, gain, and analog-to-digital converter (ADC) settings. Onsemi provides a tuning guide in their application note AN5192, which includes recommendations for register settings and image processing algorithms.
  • The maximum cable length for the MIPI interface is dependent on the signal frequency and cable quality. As a general guideline, onsemi recommends keeping the cable length below 30 cm for a 1-lane MIPI configuration and below 15 cm for a 2-lane MIPI configuration.
  • To ensure EMC, follow onsemi's guidelines for PCB design, component selection, and shielding. Additionally, perform EMC testing according to industry standards such as IEC 61967 and CISPR 25.
  • The AR0233ATSC17XUEA1-DRBR's operating temperature range is -40°C to 85°C. Temperature affects the sensor's dark current, noise, and sensitivity. Onsemi provides temperature-dependent performance data in their datasheet and application notes.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

AR0233ATSC17XUEA1-DRBR Overview

Use the download button to access the AR0233ATSC17XUEA1-DRBR 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like AR023, or try a keyword search, such as Image Sensors

Parts related to AR0233ATSC17XUEA1-DRBR

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview