Description:13MP CMOS sensor with advanced 1.1µm pixel BSI technology; Die or CSP Package; Mono or Color variations; Data interfaces: 2,3 and 4 lane MIPI; Bit-depth compression available for MIPI: 10-8 and 10-6 to lower bandwidth; 3D synchronization controls to enable stereo video capture; 6.8 kbits one time programmable memory (OTPM); Programmable controls: gain, horizontal and vertical blanking, auto black level offset correction, frame size/rate, exposure, left-right and top-bottom image reversal, window size, and p
A good PCB layout for the AR1335CSSC32SMD20 involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the distance between the sensor and the microcontroller. A 4-layer PCB with a dedicated analog ground plane is recommended.
Calibration involves adjusting the integration time and gain settings to optimize the sensor's response to ambient light. A calibration procedure can be implemented using a light source with a known intensity, and adjusting the sensor's settings to achieve a linear response.
The AR1335CSSC32SMD20 is rated for operation from -40°C to 85°C. However, the sensor's accuracy and sensitivity may degrade at extreme temperatures. It's recommended to operate the sensor within a temperature range of 0°C to 70°C for optimal performance.
The AR1335CSSC32SMD20 communicates via an I2C interface. The sensor's SCL and SDA pins should be connected to the microcontroller's I2C pins, and the sensor's INT pin can be used to interrupt the microcontroller when a measurement is complete.
A 10uF ceramic capacitor should be placed as close as possible to the sensor's VDD pin to decouple the power supply. Additional decoupling capacitors can be added in parallel to further reduce noise and improve the sensor's performance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
AR1335CSSC32SMD20 Overview
Use the download button to access the AR1335CSSC32SMD20 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like AR133,
or try a keyword search, such as Image Sensors
