Ams OSRAM recommends a 4-layer PCB with a dedicated thermal layer, and a thermal pad connected to a large copper area on the bottom layer for efficient heat dissipation. Additionally, a minimum of 1mm clearance around the device is recommended to ensure proper airflow.
The AS8579-ASST has built-in overvoltage protection (OVP) and undervoltage lockout (UVLO) features. The OVP threshold is typically set at 18V, and the UVLO threshold is typically set at 6V. The device will automatically shut down in case of overvoltage or undervoltage conditions to prevent damage.
Ams OSRAM recommends using a high-quality, low-ESR ceramic capacitor (e.g., X7R or X5R) with a value of 10uF to 22uF, depending on the specific application requirements. The capacitor should be placed as close as possible to the VIN pin to minimize noise and ensure stable operation.
The AS8579-ASST has a soft-start feature that ramps up the output voltage during power-up to prevent inrush currents. During power-down, the device will gradually decrease the output voltage to prevent voltage spikes. The power-up and power-down sequences can be controlled using the EN pin.
The maximum allowed junction temperature for the AS8579-ASST is 150°C. However, it's recommended to keep the junction temperature below 125°C for optimal performance and reliability.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AS8579-ASST Overview
Use the download button to access the AS8579-ASST schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AS857,
or try a keyword search, such as Other Sensors/Transducers
