ASCO-16.000MHZ-EK-T3 footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASCO-16.000MHZ-EK-T3 Details

Abracon recommends a ground plane underneath the oscillator, with a minimum of 2mm clearance around the device. Additionally, the PCB should have a solid ground plane on the bottom layer, and the oscillator should be placed as close as possible to the microcontroller or IC that it is driving.
Abracon recommends using a reflow soldering process with a peak temperature of 260°C (500°F) for 10-15 seconds. Hand soldering is not recommended due to the risk of overheating the device. Ensure that the PCB is clean and free of oxidation before soldering.
The ASCO-16.000MHZ-EK-T3 is rated for operation from -40°C to +85°C (-40°F to +185°F). However, the device can be customized for extended temperature ranges upon request.
Yes, the ASCO-16.000MHZ-EK-T3 is designed to withstand high-vibration environments. Abracon recommends following the recommended PCB layout and mounting guidelines to ensure optimal performance in such environments.
The typical start-up time for the ASCO-16.000MHZ-EK-T3 is 2-5 milliseconds. However, this can vary depending on the specific application and operating conditions.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASCO-16.000MHZ-EK-T3 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASCO-, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →