ASCO-20.000MHZ-EK-T3 footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASCO-20.000MHZ-EK-T3 Details

Abracon recommends a ground plane underneath the oscillator, with a minimum of 2mm clearance around the device. Additionally, the input and output traces should be kept short and matched to the recommended impedance (typically 50 ohms) to minimize signal degradation.
The ASCO-20.000MHZ-EK-T3 is designed to start oscillating within 10ms of power-up, and will continue to oscillate until power is removed. It is recommended to sequence power-up and power-down to ensure a clean startup and shutdown of the oscillator.
The ASCO-20.000MHZ-EK-T3 is rated for operation from -40°C to +85°C, with a typical frequency stability of ±50ppm over the entire temperature range.
Yes, the ASCO-20.000MHZ-EK-T3 is designed to withstand vibrations up to 20G peak acceleration, making it suitable for use in industrial and automotive applications.
Abracon recommends storing the ASCO-20.000MHZ-EK-T3 in a dry, cool place (less than 30°C and 60% relative humidity) to prevent moisture absorption and damage.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASCO-20.000MHZ-EK-T3 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASCO-, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →