ASCO2-19.200MHZ-EK-T3 footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASCO2-19.200MHZ-EK-T3 Details

Abracon recommends following a standard PCB layout for crystal oscillators, with a ground plane underneath the device, and keeping the traces as short as possible to minimize noise and parasitic inductance.
While the ASCO2-19.200MHZ-EK-T3 is designed to operate in a wide temperature range (-40°C to 85°C), it's still important to follow proper PCB design and assembly guidelines to ensure reliability in harsh environments. Additionally, Abracon recommends using a conformal coating to protect the device from moisture and contaminants.
Abracon recommends following the recommended soldering profile and using a solder with a melting point above 217°C to ensure reliable connections. Additionally, the device should be handled with care to prevent mechanical stress and damage during the soldering process.
The typical start-up time for the ASCO2-19.200MHZ-EK-T3 is around 2-5 ms, but this can vary depending on the specific application and circuit design. Abracon recommends consulting the datasheet and application notes for more information on start-up time and oscillator stability.
Yes, the ASCO2-19.200MHZ-EK-T3 is designed to minimize EMI emissions and is suitable for use in applications that require low electromagnetic interference. Abracon recommends following proper PCB design and layout guidelines to further reduce EMI emissions.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASCO2-19.200MHZ-EK-T3 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASCO2, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →