ASCO2-24.576MHZ-EK-T3 - ABRACON

ASCO2-24.576MHZ-EK-T3 Frequently Asked Questions (FAQs)

• What is the recommended termination impedance for this oscillator?
  The recommended termination impedance for the ASCO2-24.576MHZ-EK-T3 is 15pF to 30pF. This is not explicitly stated in the datasheet, but it's a general guideline for most oscillators.
• Can I use this oscillator in a high-temperature environment?
  The ASCO2-24.576MHZ-EK-T3 is rated for operation up to 85°C, but it's not recommended for use in high-temperature environments above 85°C. If you need an oscillator for high-temperature applications, you may need to consider a different part or consult with Abracon Corporation for custom solutions.
• What is the typical power consumption of this oscillator?
  The typical power consumption of the ASCO2-24.576MHZ-EK-T3 is around 10mA to 20mA, depending on the output load and frequency. This information is not explicitly stated in the datasheet, but it's a general guideline for most oscillators in this class.
• Can I use this oscillator in a low-power design?
  The ASCO2-24.576MHZ-EK-T3 is not optimized for low-power designs. If you need a low-power oscillator, you may need to consider a different part with lower power consumption. However, you can try to reduce the power consumption by using a lower supply voltage or reducing the output load.
• What is the jitter performance of this oscillator?
  The jitter performance of the ASCO2-24.576MHZ-EK-T3 is not explicitly stated in the datasheet. However, Abracon Corporation typically provides jitter specifications for their oscillators. You can contact their technical support or request a custom datasheet for more information.