ASD-12.000MHZ-LC-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASD-12.000MHZ-LC-T Details

Abracon recommends a layout with a ground plane underneath the oscillator, and to keep the traces as short as possible to minimize parasitic inductance and capacitance. A 4-layer PCB with a dedicated ground layer is also recommended.
The ASD-12.000MHZ-LC-T is rated for operation up to 125°C, but its frequency stability may degrade at higher temperatures. Abracon recommends derating the frequency tolerance by 0.05 ppm/°C above 85°C.
Yes, the ASD-12.000MHZ-LC-T has a built-in EMI filter that helps reduce electromagnetic interference. However, additional EMI mitigation techniques such as shielding, grounding, and layout optimization may still be necessary to meet specific EMI requirements.
Abracon recommends a drive level of 1-10 μW to ensure optimal performance and minimize power consumption. Higher drive levels may cause the oscillator to operate outside its specified frequency range.
The ASD-12.000MHZ-LC-T oscillator is designed to exhibit minimal aging and frequency drift over time. Abracon specifies a maximum frequency drift of ±5 ppm over 10 years at 25°C. However, actual performance may vary depending on environmental conditions and usage.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASD-12.000MHZ-LC-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASD-1, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →