Abracon recommends a layout with a ground plane underneath the oscillator, and to keep the traces as short as possible to minimize parasitic inductance and capacitance. A 4-layer PCB with a dedicated ground layer is recommended.
The ASD1-8.000MHZ-EC-T has built-in ESD protection and is designed to meet EMI standards. However, it's still recommended to follow proper ESD handling procedures and to use additional EMI shielding if necessary, depending on the application.
The ASD1-8.000MHZ-EC-T is rated for operation from -40°C to +85°C, but it's recommended to derate the frequency tolerance and stability over the full temperature range.
The ASD1-8.000MHZ-EC-T is designed to meet the requirements of MIL-STD-202, Method 204, for vibration. However, it's recommended to perform additional testing and validation for specific vibration profiles and amplitudes.
The recommended drive level for the ASD1-8.000MHZ-EC-T is 1-10 μW, depending on the specific application and circuit design. Exceeding the recommended drive level can affect the oscillator's performance and longevity.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ASD1-8.000MHZ-EC-T Overview
Use the download button to access the ASD1-8.000MHZ-EC-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ASD1-,
or try a keyword search, such as XO
