Abracon recommends a layout with a ground plane underneath the oscillator, and to keep the traces as short as possible to minimize parasitic inductance and capacitance. A 4-layer PCB with a dedicated ground layer is also recommended.
The ASD3-24.000MHZ-EC-T is rated for operation up to 125°C, but its frequency stability may degrade at higher temperatures. Abracon recommends derating the frequency tolerance by 5 ppm/°C above 85°C.
Yes, the ASD3-24.000MHZ-EC-T has a built-in EMI filter that helps reduce electromagnetic interference. However, additional EMI mitigation techniques may still be required depending on the specific design requirements.
Abracon recommends a drive level of 1-10 μW to ensure optimal performance and minimize power consumption. Higher drive levels may cause the oscillator to operate outside its specified frequency range.
The ASD3-24.000MHZ-EC-T has a typical aging rate of ±2 ppm/year, and its frequency drift is typically ±5 ppm over a 10-year period. However, these values may vary depending on the specific application and operating conditions.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ASD3-24.000MHZ-EC-T Overview
Use the download button to access the ASD3-24.000MHZ-EC-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ASD3-,
or try a keyword search, such as XO
