ASDM1-60.000MHZ-LR-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASDM1-60.000MHZ-LR-T Details

Abracon recommends a layout with a ground plane underneath the oscillator, and to keep the traces as short as possible to minimize parasitic inductance and capacitance. A 4-layer PCB with a dedicated ground plane is ideal.
To ensure reliable startup, Abracon recommends a power-up ramp time of at least 1ms, and a power supply voltage that meets the specified operating range. Additionally, the oscillator should be decoupled from the power supply with a 10nF to 100nF capacitor.
The ASDM1-60.000MHZ-LR-T oscillator is rated for operation from -40°C to +85°C. However, Abracon recommends derating the frequency tolerance and stability specifications for operation above +70°C.
No, the ASDM1-60.000MHZ-LR-T oscillator is a fixed-frequency device and cannot be adjusted to operate at a different frequency. Abracon offers a range of frequencies in their ASDM1 series, so it's recommended to select the correct part number for the desired frequency.
The typical current consumption of the ASDM1-60.000MHZ-LR-T oscillator is around 10mA to 20mA, depending on the load capacitance and operating conditions. Abracon recommends consulting the datasheet for specific current consumption information.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASDM1-60.000MHZ-LR-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASDM1, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →