ASEM1-2.048MHZ-ER-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASEM1-2.048MHZ-ER-T Details

Abracon recommends a layout with a solid ground plane, minimal signal trace length, and a decoupling capacitor (e.g., 0.01uF) between VCC and GND to reduce noise and ensure stable operation.
The ASEM1-2.048MHZ-ER-T is rated for operation up to 85°C, but its frequency stability may degrade above 70°C. For high-temperature applications, consider using a more temperature-stable oscillator or consulting with Abracon's application engineers.
Yes, but ensure that the oscillator's VCC pin is connected to a stable power rail, and consider using level shifters or buffers to isolate the oscillator's output from other power domains to prevent noise coupling.
The typical start-up time for the ASEM1-2.048MHZ-ER-T is around 2-5ms, but this can vary depending on the specific application and power-up sequence. Consult the datasheet or contact Abracon's support for more information.
The ASEM1-2.048MHZ-ER-T oscillator is not specifically designed for safety-critical applications. For such applications, consider using oscillators with built-in fault detection, redundant circuits, or other safety features. Consult with Abracon's application engineers or safety experts for guidance.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASEM1-2.048MHZ-ER-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASEM1, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →