ASEMB-30.000MHZ-LC-T - ABRACON

ASEMB-30.000MHZ-LC-T Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  Abracon recommends a symmetrical PCB layout with a solid ground plane, and the oscillator should be placed as close as possible to the microcontroller or IC. A minimum of 10 mils (0.25 mm) clearance around the oscillator is recommended to prevent electromagnetic interference.
• How do I handle the oscillator's power supply decoupling?
  Abracon recommends using a 10 nF to 100 nF decoupling capacitor between the VCC pin and the GND pin, placed as close as possible to the oscillator. This helps to filter out noise and ensure stable operation.
• What is the operating temperature range for this oscillator?
  The ASEMB-30.000MHZ-LC-T has an operating temperature range of -40°C to +85°C. However, it's essential to note that the oscillator's frequency stability and accuracy may degrade at extreme temperatures.
• Can I use this oscillator in a high-vibration environment?
  While the ASEMB-30.000MHZ-LC-T is designed to be rugged, it's still susceptible to vibration-induced frequency shifts. Abracon recommends using vibration-dampening materials or mounting the oscillator in a way that minimizes vibration transmission to ensure optimal performance.
• How do I ensure electromagnetic compatibility (EMC) with this oscillator?
  To ensure EMC, Abracon recommends using a shielded enclosure, keeping the oscillator away from other high-frequency components, and using a common-mode choke or ferrite bead on the power supply lines to reduce electromagnetic radiation.