ASEMPC-12.000MHZ-Z-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASEMPC-12.000MHZ-Z-T Details

Abracon recommends a soldering temperature profile with a peak temperature of 260°C (500°F) for a maximum of 10 seconds. It's essential to follow the recommended soldering profile to prevent damage to the crystal oscillator.
To ensure reliable startup, Abracon recommends a power-up ramp time of 1 ms to 10 ms, and a power supply voltage of 1.8V to 3.3V. Additionally, ensure the oscillator is properly decoupled with a 0.01 μF to 0.1 μF capacitor between VCC and GND.
The ASEMPC-12.000MHZ-Z-T is rated for operation from -40°C to +85°C. However, it's essential to note that the oscillator's frequency stability and accuracy may degrade at extreme temperatures.
The ASEMPC-12.000MHZ-Z-T is a fixed-frequency oscillator, and its frequency cannot be adjusted. If you need a different frequency, you'll need to select a different part number or consider using a programmable oscillator.
The typical current consumption of the ASEMPC-12.000MHZ-Z-T is around 10 mA to 20 mA, depending on the operating frequency and voltage. However, it's essential to consult the datasheet for specific current consumption values.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASEMPC-12.000MHZ-Z-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASEMP, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →