ASEMPC-12.288MHZ-LR-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASEMPC-12.288MHZ-LR-T Details

Abracon recommends a symmetrical PCB layout with a ground plane underneath the oscillator to minimize noise and radiation. The oscillator should be placed as close as possible to the microcontroller or IC that it is driving.
To ensure reliable startup, Abracon recommends applying a power-on reset (POR) signal to the oscillator, and ensuring that the oscillator is properly biased and terminated. Additionally, the oscillator should be driven by a stable voltage source, and the PCB layout should be designed to minimize noise and interference.
The ASEMPC-12.288MHZ-LR-T oscillator is rated for operation over a temperature range of -40°C to +85°C. However, it's recommended to derate the oscillator's frequency tolerance and stability over the full operating temperature range.
No, the ASEMPC-12.288MHZ-LR-T oscillator is a fixed-frequency oscillator and cannot be adjusted to operate at a different frequency. If a different frequency is required, a different oscillator part number should be selected.
Abracon recommends driving the oscillator with a CMOS-compatible signal with a maximum drive level of 1.8V to 3.3V. The drive level should be adjusted to ensure that the oscillator is properly biased and terminated.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASEMPC-12.288MHZ-LR-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASEMP, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →