ASEMPC-24.000MHZ-LR-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASEMPC-24.000MHZ-LR-T Details

Abracon recommends a soldering temperature profile with a peak temperature of 260°C (500°F) for a maximum of 10 seconds. It's essential to follow the recommended soldering profile to ensure the oscillator's reliability and performance.
The ASEMPC-24.000MHZ-LR-T is designed to operate within an industrial temperature range of -40°C to 85°C. While it can tolerate high temperatures, its frequency stability and accuracy may degrade above 70°C. It's crucial to consider thermal management and heat dissipation in your design.
Abracon recommends using a 10nF to 22nF decoupling capacitor with a voltage rating of 10V or higher, placed as close as possible to the oscillator's power pins. This helps to filter out noise and ensure stable operation.
Yes, the ASEMPC-24.000MHZ-LR-T can operate with a 3.3V power supply. However, ensure that your design meets the oscillator's minimum voltage requirement of 2.7V and maximum voltage rating of 3.6V.
To ensure reliable startup, Abracon recommends applying power to the oscillator slowly (dV/dt < 1V/ms) and ensuring that the power supply voltage reaches the minimum operating voltage (2.7V) before the oscillator is enabled. Additionally, a 10kΩ to 22kΩ pull-up resistor on the oscillator's output pin can help stabilize the startup process.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASEMPC-24.000MHZ-LR-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASEMP, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →