ASFL1-11.0592MHZ-L-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASFL1-11.0592MHZ-L-T Details

Abracon recommends a symmetrical PCB layout with a solid ground plane, minimal signal trace length, and a 0.1uF decoupling capacitor between VCC and GND to ensure optimal performance and minimize noise.
The ASFL1-11.0592MHZ-L-T is rated for operation up to 85°C, but its frequency stability may degrade at higher temperatures. Abracon recommends derating the frequency tolerance by 0.05ppm/°C above 70°C to ensure reliable operation.
Yes, the ASFL1-11.0592MHZ-L-T is designed to minimize EMI emissions. Abracon recommends following proper PCB design and layout guidelines, using a shielded enclosure, and implementing EMI filtering to further reduce emissions.
Abracon recommends a drive level of 1-10mA to ensure reliable operation and minimize power consumption. Exceeding the recommended drive level may reduce the oscillator's lifespan or cause it to malfunction.
The ASFL1-11.0592MHZ-L-T oscillator may exhibit a brief start-up time (typically <10ms) and some frequency jitter during power-up and power-down cycles. Abracon recommends implementing a power-on reset circuit to ensure reliable system operation.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASFL1-11.0592MHZ-L-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASFL1, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →