ASFL1-40.000MHZ-L-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASFL1-40.000MHZ-L-T Details

Abracon recommends a symmetrical PCB layout with a solid ground plane, and the oscillator should be placed as close as possible to the microcontroller or IC. A minimum of 10 mils (0.25 mm) clearance around the oscillator is recommended to prevent electromagnetic interference.
The ASFL1-40.000MHZ-L-T has a power-up time of around 2-5 ms. Engineers should ensure that their design can handle this power-up time and that the oscillator is not driven by the load during this period. A soft-start circuit or a power-on reset circuit can be used to manage the power-up behavior.
The recommended drive level for the ASFL1-40.000MHZ-L-T is 1-10 μW. Driving the oscillator at higher levels can reduce its lifespan or cause it to malfunction. Engineers should ensure that their design provides a suitable drive level to the oscillator.
The ASFL1-40.000MHZ-L-T has a temperature range of -40°C to +85°C. The frequency stability is affected by temperature, with a typical deviation of ±20 ppm over the operating temperature range. Engineers should consider this temperature dependence when designing their system.
Abracon recommends storing the ASFL1-40.000MHZ-L-T in a dry, cool place, away from direct sunlight and moisture. The storage temperature should be between -40°C and +85°C, and the relative humidity should be below 80%. Proper storage conditions can help maintain the oscillator's performance and lifespan.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASFL1-40.000MHZ-L-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASFL1, or try a keyword search, such as XO

If you searched for ASFL1-40.000MHZ-L-T, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →