ASFL3-12.000MHZ-EK-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASFL3-12.000MHZ-EK-T Details

Abracon recommends a low-impedance, low-inductance PCB layout with a solid ground plane to minimize noise and ensure optimal performance. A minimum of 2-layer PCB with a dedicated ground plane is recommended.
To ensure reliable startup, Abracon recommends a power-up ramp time of 1ms or slower, and a power supply voltage of 3.3V ±10%. Additionally, ensure the oscillator is not loaded with excessive capacitance, and the PCB layout is optimized for low noise and low inductance.
The ASFL3-12.000MHZ-EK-T is rated for operation from -40°C to +85°C. However, it's essential to note that the oscillator's frequency stability and accuracy may degrade at extreme temperatures.
The ASFL3-12.000MHZ-EK-T is a fixed-frequency oscillator, and its frequency cannot be adjusted. If you need a different frequency, you'll need to select a different part number or consider using a programmable oscillator.
The typical current consumption of the ASFL3-12.000MHZ-EK-T is around 10mA, but this can vary depending on the specific application and operating conditions. It's essential to consult the datasheet and application notes for more information.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASFL3-12.000MHZ-EK-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASFL3, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →