ASFLMB-32.000MHZ-LY-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASFLMB-32.000MHZ-LY-T Details

Manufacturer Part Number:
ASFLMB-32.000MHZ-LY-T
Rohs Code:
Yes
Part Life Cycle Code:
Active
Package Description:
ROHS COMPLIANT, ULTRA MINIATURE, PLASTIC, QFN-4
Country Of Origin:
Thailand
Factory Lead Time:
8 Weeks
Manufacturer:
Abracon Corporation
YTEOL:
6
Additional Feature:
TRI-STATE; STANDBY; ENABLE/DISABLE FUNCTION; TR; SUPPLY VOLTAGE 1.8V AND 2.5V ALSO AVAILLABLE
Fall Time-Max:
2 ns
Frequency Adjustment-Mechanical:
NO
Frequency Stability:
10%
JESD-609 Code:
e4
Mounting Feature:
SURFACE MOUNT
Number of Terminals:
4
Operating Frequency-Nom:
32 MHz
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-40 °C
Oscillator Type:
CMOS
Output Load:
10 KOHM, 15 pF
Package Body Material:
PLASTIC/EPOXY
Physical Dimension:
5.0mm x 3.2mm x 0.85mm
Rise Time-Max:
2 ns
Supply Voltage-Nom:
3.3 V
Surface Mount:
YES
Symmetry-Max:
55/45 %
Terminal Finish:
Nickel/Palladium/Gold (Ni/Pd/Au)

Abracon recommends a layout with a solid ground plane, minimal signal trace length, and a 10nF decoupling capacitor between VCC and GND, placed as close to the oscillator as possible.
The oscillator is designed to operate up to 125°C, but its frequency stability may degrade above 85°C. It's essential to consider thermal management and potential frequency deviations in high-temperature applications.
Abracon recommends a drive level of 1-10μA to ensure optimal performance and minimize power consumption. Exceeding this drive level may lead to increased power consumption and reduced oscillator lifespan.
Yes, the oscillator is designed to minimize EMI emissions. However, it's essential to follow proper PCB layout and design guidelines, such as using a solid ground plane, to further reduce EMI emissions.
The oscillator is designed to provide low jitter and phase noise, with typical values of <100ps RMS jitter and -120dBc/Hz phase noise at 10kHz offset. However, exact values may vary depending on the specific application and operating conditions.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASFLMB-32.000MHZ-LY-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASFLM, or try a keyword search, such as XO

Showing 0 results

Image	Part Number	Model
	DSC1001BI5-032.0000T Microchip Technology Inc MEMS OSC, LVCMOS, 32MHz, 10PPM, 1.8-3.3V, -40 to 85C, 5.0x3.2mm
	DSC1001BE5-032.0000T Microchip Technology Inc CMOS Output Clock Oscillator, 32MHz Nom
	DSC1001BL5-032.0000 Microchip Technology Inc CMOS Output Clock Oscillator, 32MHz Nom
	DSC1001BC5-032.0000 Microchip Technology Inc CMOS Output Clock Oscillator, 32MHz Nom
	DSC1001BC5-032.0000T Microchip Technology Inc CMOS Output Clock Oscillator, 32MHz Nom
For a full list of alternate parts for ASFLMB-32.000MHZ-LY-T, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →