ASPI-0310FS-4R7M-T2 - ABRACON

ASPI-0310FS-4R7M-T2 Frequently Asked Questions (FAQs)

• What is the recommended termination resistance for this oscillator?
  The recommended termination resistance for the ASPI-0310FS-4R7M-T2 is 1 kΩ to ensure proper signal integrity and minimize reflections.
• Can I use this oscillator in a high-temperature environment?
  The ASPI-0310FS-4R7M-T2 is rated for operation up to 85°C, but it's recommended to derate the frequency stability and output amplitude above 70°C. Consult the datasheet for specific derating curves.
• How do I ensure the oscillator starts up reliably in my design?
  To ensure reliable startup, make sure to provide a stable power supply, keep the oscillator away from noise sources, and use a decoupling capacitor (e.g., 10 nF) between VCC and GND. Additionally, ensure the load capacitance is within the recommended range (15 pF to 30 pF).
• What is the typical power consumption of this oscillator?
  The typical power consumption of the ASPI-0310FS-4R7M-T2 is around 20 mA, but this can vary depending on the specific application and operating conditions. Consult the datasheet for more information.
• Can I use this oscillator in a design with multiple power domains?
  Yes, the ASPI-0310FS-4R7M-T2 can be used in designs with multiple power domains, but ensure that the oscillator is powered from a stable, noise-free supply, and that the output is properly isolated from other power domains.