The recommended land pattern for the ASPI-0403S-150M-T can be found in the Abracon Corporation's application note AN-04, which provides detailed guidelines for PCB layout and assembly.
To ensure reliable startup, make sure to follow the recommended power-up sequence, provide a stable power supply, and ensure the oscillator is properly terminated. Additionally, consider adding a pull-up or pull-down resistor to the enable pin if it's not driven by a logic signal.
The typical power consumption of the ASPI-0403S-150M-T is around 10mA, but this can vary depending on the specific application and operating conditions. It's recommended to check the datasheet and consult with Abracon Corporation's technical support for more detailed information.
The ASPI-0403S-150M-T is rated for operation up to 85°C, but it's recommended to derate the frequency and consider using a more temperature-stable oscillator if your application requires operation above 70°C. Consult with Abracon Corporation's technical support for more information.
To troubleshoot issues with the oscillator not oscillating, check the power supply, ensure the enable pin is properly driven, and verify the oscillator is properly terminated. Also, check for any signs of damage or contamination on the oscillator or PCB. If the issue persists, consult with Abracon Corporation's technical support for further assistance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ASPI-0403S-150M-T Overview
Use the download button to access the ASPI-0403S-150M-T schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like ASPI-,
or try a keyword search, such as Fixed Inductors
