ASPI-0628-220M-T1 - ABRACON

ASPI-0628-220M-T1 Frequently Asked Questions (FAQs)

• What is the recommended PCB layout and land pattern for optimal performance?
  Abracon recommends following the recommended PCB layout and land pattern guidelines provided in the application note AN-03, which can be found on their website. This ensures optimal performance, reduced noise, and improved reliability.
• How does the oscillator's ESR affect the overall circuit performance?
  The oscillator's Equivalent Series Resistance (ESR) can affect the overall circuit performance by introducing additional noise and reducing the oscillator's amplitude. Abracon recommends selecting an oscillator with a low ESR to minimize these effects.
• What is the recommended drive level for the oscillator, and how does it impact power consumption?
  The recommended drive level for the ASPI-0628-220M-T1 is typically between 10-50 ohms. A higher drive level can increase power consumption, while a lower drive level may reduce power consumption but compromise oscillator performance. Consult the datasheet and application notes for specific guidance.
• How does the oscillator's operating temperature range affect its frequency stability and accuracy?
  The oscillator's operating temperature range can affect its frequency stability and accuracy. The ASPI-0628-220M-T1 is specified to operate within a temperature range of -40°C to +85°C. Operating outside this range may compromise frequency stability and accuracy. Consult the datasheet for specific temperature-related specifications.
• What are the recommended soldering and rework conditions for the oscillator?
  Abracon recommends following the recommended soldering and rework conditions outlined in the datasheet and application notes. This includes using a soldering iron with a temperature of 260°C (max) and a dwell time of 3 seconds (max) to prevent damage to the oscillator.