Abracon recommends a 4-layer PCB with a solid ground plane and a separate power plane for the oscillator. The oscillator output should be routed as a differential pair, and the PCB should be designed to minimize noise and EMI.
The ASPI-6045S-680M-T requires a 50-ohm termination resistor between the output pins and GND. Additionally, the output pins should be AC-coupled to the load using a capacitor with a value of 100nF or greater.
The ASPI-6045S-680M-T is rated for operation from -40°C to +85°C. However, the device may be operated at temperatures up to +105°C for short periods of time, but this may affect its reliability and lifespan.
Yes, the ASPI-6045S-680M-T can be used in a redundant or backup oscillator configuration. However, the device requires a separate power supply and enable input for each oscillator, and the outputs should be properly synchronized to prevent frequency conflicts.
To troubleshoot issues with the ASPI-6045S-680M-T, check the power supply voltage, ensure proper termination and routing, and verify that the device is operated within its specified temperature range. Additionally, check for any noise or EMI sources that may be affecting the oscillator's performance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ASPI-6045S-680M-T Overview
Use the download button to access the ASPI-6045S-680M-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ASPI-,
or try a keyword search, such as Fixed Inductors
