ASPI-7318-R47M-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASPI-7318-R47M-T Details

Abracon recommends a 4-layer PCB with a solid ground plane and a separate power plane for the oscillator. The oscillator output should be routed as a differential pair, and the PCB should be designed to minimize noise and EMI.
The ASPI-7318-R47M-T has a built-in power-on reset circuit that ensures the oscillator starts up in a stable state. During power-down, the oscillator output is disabled to prevent any unwanted oscillations.
The recommended drive strength for the ASPI-7318-R47M-T output is 15 pF to 30 pF. This ensures reliable operation and minimizes the risk of signal degradation.
The ASPI-7318-R47M-T is designed to operate over an industrial temperature range of -40°C to +85°C. However, the oscillator's frequency stability and jitter performance may degrade at higher temperatures. It's recommended to consult the datasheet and application notes for specific guidance on high-temperature operation.
Yes, the ASPI-7318-R47M-T can be used in a redundant or backup oscillator configuration. However, it's essential to ensure that the oscillators are properly synchronized and that the system is designed to handle the switchover between the primary and backup oscillators.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASPI-7318-R47M-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASPI-, or try a keyword search, such as Fixed Inductors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →