ASPIAIG-S6055-150M-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASPIAIG-S6055-150M-T Details

Abracon recommends a 4-layer PCB with a solid ground plane and a separate power plane for the oscillator. The oscillator output should be routed as a differential pair, and the power supply decoupling capacitors should be placed as close to the device as possible.
The ASPIAIG-S6055-150M-T requires a 50-ohm termination resistor on the output pins to ensure proper signal integrity. The termination resistor should be placed as close to the device as possible.
Abracon recommends powering up the ASPIAIG-S6055-150M-T in the following sequence: VCC, then VDD, and finally the enable pin (EN). This ensures proper initialization of the device.
To troubleshoot issues with the ASPIAIG-S6055-150M-T, check the power supply voltage, ensure proper termination, and verify the enable pin (EN) is properly driven. Also, check for any noise or interference on the input clock signal.
The ASPIAIG-S6055-150M-T operates over a temperature range of -40°C to +85°C. However, the device's performance may degrade at extreme temperatures.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASPIAIG-S6055-150M-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASPIA, or try a keyword search, such as Fixed Inductors

Showing 0 results

Image	Part Number	Model
	ASPIAIG-S6055150 Abracon Corporation General Purpose Inductor,
	ASPIAIG-S6055-150 Abracon Corporation General Purpose Inductor, 15uH, 20%, 1 Element, Wirewound-Core, SMD, 2424, CHIP
For a full list of alternate parts for ASPIAIG-S6055-150M-T, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →