ASSVP-40.000MHZ-C04-T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ASSVP-40.000MHZ-C04-T Details

Abracon recommends a soldering temperature profile with a peak temperature of 240°C to 250°C, with a dwell time of 1-2 seconds. However, it's essential to consult the specific soldering guidelines provided by Abracon or a qualified engineer to ensure optimal results.
The ASSVP-40.000MHZ-C04-T oscillator is designed to start oscillating within 10ms of power-up, and it will continue to oscillate until the power supply drops below 1.5V. During power-down, the oscillator will stop oscillating when the power supply drops below 1.5V.
Abracon recommends using a 10nF to 100nF decoupling capacitor with a voltage rating of 10V or higher, placed as close as possible to the oscillator's power pins. The exact value may vary depending on the specific application and PCB layout.
The ASSVP-40.000MHZ-C04-T oscillator is designed to operate in environments with moderate vibration and shock. However, for extreme environments, Abracon recommends consulting their application notes and performing thorough testing to ensure the oscillator meets the specific requirements.
Yes, the ASSVP-40.000MHZ-C04-T oscillator is designed to provide high accuracy and stability over temperature. It has a typical frequency stability of ±50ppm over the operating temperature range of -40°C to 85°C.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ASSVP-40.000MHZ-C04-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ASSVP, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →