AST3TQ-10.000MHZ-2 footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

AST3TQ-10.000MHZ-2 Details

Abracon recommends a symmetrical PCB layout with a ground plane underneath the oscillator to minimize noise and radiation. The oscillator should be placed as close as possible to the microcontroller or clock input.
The start-up time of the AST3TQ-10.000MHZ-2 is typically around 2-5 ms. Engineers should ensure that their system design allows for this start-up time before expecting a stable clock signal.
Abracon recommends using a 10-100 nF decoupling capacitor between the VCC pin and ground to filter out noise and ensure stable operation.
The AST3TQ-10.000MHZ-2 is rated for operation up to 85°C. However, engineers should consult the datasheet and Abracon's application notes for specific guidance on using the oscillator in high-temperature environments.
The output signal of the AST3TQ-10.000MHZ-2 should be terminated with a 15-50 ohm resistor to match the impedance of the transmission line and prevent signal reflections.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AST3TQ-10.000MHZ-2 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AST3T, or try a keyword search, such as TCXO

Showing 0 results

Image	Part Number	Model
	AST3TQ-10.000MHZ-2-T Abracon Corporation CMOS Output Clock Oscillator, 10MHz Nom
For a full list of alternate parts for AST3TQ-10.000MHZ-2, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →