ASV-2.0480MHZ-LRS-T - ABRACON

ASV-2.0480MHZ-LRS-T Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  Abracon recommends a symmetrical layout with the crystal oscillator placed near the center of the PCB, and the traces should be as short as possible to minimize noise and radiation. A ground plane underneath the device is also recommended.
• How do I ensure the crystal oscillator is properly soldered?
  Use a soldering iron with a fine tip and a temperature of 250°C to 260°C. Apply a small amount of solder to the pads, and use a gentle touch to avoid applying excessive pressure, which can damage the device.
• What is the maximum operating temperature range for this device?
  The ASV-2.0480MHZ-LRS-T is rated for operation from -40°C to +85°C, but it's recommended to derate the frequency tolerance and stability over the full temperature range.
• Can I use this crystal oscillator in a high-vibration environment?
  The ASV-2.0480MHZ-LRS-T is designed to withstand moderate vibration levels, but it's recommended to consult Abracon's vibration testing data and perform additional testing to ensure the device meets the specific requirements of your application.
• How do I handle ESD protection for this device?
  Abracon recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the PCB to protect the crystal oscillator from electrostatic discharge. Handle the device with ESD-safe materials and follow proper handling procedures.