A good PCB layout for the ATS642LSHTN-I1-T involves keeping the sensor and the IC as close as possible, using a ground plane to reduce noise, and minimizing the length of the signal traces. It's also recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
Calibration of the ATS642LSHTN-I1-T involves setting the zero-speed offset and the sensitivity of the device. This can be done by rotating the target wheel at a known speed and direction, and then adjusting the offset and sensitivity registers to achieve accurate measurements.
The ATS642LSHTN-I1-T has an operating temperature range of -40°C to 150°C, making it suitable for use in a wide range of applications, including automotive and industrial systems.
The ATS642LSHTN-I1-T can be interfaced with a microcontroller using a standard SPI or I²C interface. The device provides a 14-bit speed output and a 1-bit direction output, which can be connected to the microcontroller's digital input pins.
The typical current consumption of the ATS642LSHTN-I1-T is around 12 mA, making it suitable for use in low-power applications. However, the current consumption can vary depending on the operating frequency and the output voltage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ATS642LSHTN-I1-T Overview
Use the download button to access the ATS642LSHTN-I1-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ATS64,
or try a keyword search, such as Magnetic Field Sensors
