A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the sense lines as short as possible and away from noise sources. Use a common mode filter or a ferrite bead to reduce EMI.
Calibration involves applying a known current to the device and adjusting the offset and gain registers to achieve accurate measurement. Refer to the application note AN296065 for detailed calibration procedures.
The maximum allowable voltage on the VCC pin is 5.5V. Exceeding this voltage may damage the device.
The ATS685LSHTN-T is rated for operation up to 150°C. However, the device's accuracy and reliability may degrade at high temperatures. Consult the datasheet for temperature-related specifications and derating factors.
Use a shielded cable for the sense lines, keep the device away from noise sources, and use a common mode filter or a ferrite bead to reduce EMI. Ensure the PCB layout is designed for EMC and follow the guidelines in the application note AN296065.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
ATS685LSHTN-T Overview
Use the download button to access the ATS685LSHTN-T 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like ATS68,
or try a keyword search, such as Other Sensors/Transducers
