MORNSUN recommends a PCB layout with a large copper area for heat dissipation, and a minimum of 2oz copper thickness. A thermal via array under the module can also improve heat dissipation.
MORNSUN recommends using a soldering iron with a temperature of 250°C to 270°C, and a soldering time of 3-5 seconds. A soldering flux with a low acidity level is also recommended.
The maximum allowable voltage deviation for the input voltage is ±10% of the nominal input voltage. Exceeding this deviation may affect the module's performance and reliability.
Yes, the B2405S-1WR2 is designed to operate in a humidity range of 5% to 95% RH. However, it's recommended to take precautions to prevent moisture ingress, such as conformal coating or potting.
MORNSUN recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, and a voltage rating of 50V or higher.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
B2405S-1WR2 Overview
Use the download button to access the B2405S-1WR2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like B2405,
or try a keyword search, such as Power Supply Modules
Suggested Parts
If you searched for B2405S-1WR2, you might also be interested in these parts: