The recommended PCB layout for the BAS116 is to use a symmetrical layout with the device centered on the PCB, and to keep the input and output traces as short as possible to minimize parasitic inductance and capacitance. Additionally, it is recommended to use a solid ground plane and to decouple the device with a 100nF capacitor.
To ensure the BAS116 is properly biased, make sure to connect the VCC pin to a stable voltage source between 1.65V and 5.5V, and the GND pin to a solid ground plane. Also, ensure that the input voltage is within the recommended range of 0V to VCC, and that the output is not loaded with a impedance lower than 1kΩ.
The BAS116 can handle a maximum current of 100mA, but it is recommended to keep the current below 50mA to ensure reliable operation and to prevent overheating.
To protect the BAS116 from ESD damage, it is recommended to use ESD protection devices such as TVS diodes or ESD protection arrays on the input and output lines, and to handle the device with an anti-static wrist strap or mat.
The BAS116 is rated for operation up to 125°C, but it is recommended to derate the device's performance and to ensure proper cooling to prevent overheating. Additionally, it is recommended to consult the datasheet and application notes for specific guidance on high-temperature operation.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BAS116 Overview
Use the download button to access the BAS116 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BAS11,
or try a keyword search, such as Rectifier Diodes
