ROHM recommends a PCB layout with a solid ground plane, short and wide traces for the high-frequency signals, and a decoupling capacitor (e.g., 100nF) close to the device. A 4-layer PCB with a dedicated ground layer is also recommended.
To ensure reliability, follow the recommended operating temperature range (−40°C to +125°C), use a suitable thermal design (e.g., heat sink, thermal pad), and consider derating the device's power dissipation according to the ambient temperature.
ROHM recommends a soldering profile with a peak temperature of 260°C, a dwell time above 240°C of 30 seconds, and a total process time of 60 seconds. A nitrogen atmosphere is also recommended to prevent oxidation.
Yes, the BAV199HMT116 can be used in switching regulator applications due to its high-frequency capability and low capacitance. However, ensure that the device is properly biased and that the switching frequency is within the recommended range (up to 100 MHz).
Handle the device with ESD-protective equipment, such as wrist straps, mats, and bags. Ensure that the device is stored in a dry, ESD-protected environment, and follow proper assembly and handling procedures to prevent ESD damage.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BAV199HMT116 Overview
Use the download button to access the BAV199HMT116 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BAV19,
or try a keyword search, such as Rectifier Diodes
