ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A 4-layer PCB with a thermal via is also recommended.
To ensure stable operation, ROHM recommends using an output capacitor with a low ESR (Equivalent Series Resistance) and a capacitance value between 10uF to 100uF. Additionally, a 1uF to 10uF ceramic capacitor in parallel with the output capacitor can help improve stability.
The maximum allowed voltage on the EN (Enable) pin is 6V, which is higher than the recommended operating voltage of 5V. However, it's essential to ensure the EN pin voltage does not exceed the maximum rating to prevent damage to the device.
While the BD42530FPJ-CE2 is rated for operation up to 105°C, ROHM recommends derating the output current and voltage to ensure reliable operation in high-temperature environments. Consult the datasheet and ROHM's application notes for specific guidance.
To troubleshoot oscillations or instability issues, check the PCB layout, output capacitor selection, and input voltage ripple. Ensure the input voltage is within the recommended range, and the output capacitor is properly selected. Consult ROHM's application notes and technical support for further assistance.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BD42530FPJ-CE2 Overview
Use the download button to access the BD42530FPJ-CE2 schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like BD425,
or try a keyword search, such as Other Signal Circuits
