ROHM provides a recommended PCB layout in their application note AN1191, which includes guidelines for thermal vias, copper pours, and component placement to minimize thermal resistance and ensure reliable operation.
ROHM provides a component selection guide in their datasheet, which includes recommendations for input and output capacitors, inductors, and resistors. Additionally, the application note AN1191 provides more detailed guidance on component selection and layout considerations.
While the datasheet specifies an operating temperature range of -40°C to 105°C, ROHM recommends derating the device's power dissipation to ensure reliable operation above 85°C. Consult the datasheet and application note AN1191 for more information on thermal derating and design considerations.
The BD61251FV-E2 has a built-in overcurrent protection (OCP) feature, which can be enabled by connecting the OCP pin to a resistor and capacitor network. ROHM provides a detailed example circuit and design guidelines in their application note AN1191.
ROHM recommends a specific startup sequence to ensure proper operation and prevent damage to the device. The recommended sequence is: 1) Power on the input voltage, 2) Wait for the internal voltage regulator to stabilize, and 3) Apply the enable signal. Consult the datasheet and application note AN1191 for more information.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BD61251FV-E2 Overview
Use the download button to access the BD61251FV-E2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BD612,
or try a keyword search, such as Motion Control Electronics
