ROHM recommends a 4-layer PCB with a solid ground plane and a separate power plane for the IC. The input and output capacitors should be placed close to the IC, and the PCB traces should be as short as possible to minimize EMI.
To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF, and to place a 1uF ceramic capacitor in parallel with the output capacitor to filter out high-frequency noise.
The maximum input voltage that can be applied to the BD63006MUV-E2 is 18V, but it is recommended to operate the IC within the recommended input voltage range of 6.5V to 16V for optimal performance and reliability.
The BD63006MUV-E2 has built-in overcurrent protection and thermal shutdown features. However, it is recommended to add external protection circuits, such as a fuse or a PTC thermistor, to prevent damage from excessive current or temperature.
The BD63006MUV-E2 is rated for operation up to 105°C, but it is recommended to derate the output current and voltage at high temperatures to ensure reliable operation. It is also recommended to use a heat sink or a thermal interface material to improve heat dissipation.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BD63006MUV-E2 Overview
Use the download button to access the BD63006MUV-E2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BD630,
or try a keyword search, such as Motion Control Electronics