Part Image

BD63565EFV-E2 - ROHM Semiconductor

Description: ROHM BD63565EFV-E2, Brushed Dual H Bridge Driver 20-Pin, HTSSOP

Download BD63565EFV-E2 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
BD63565EFV-E2 - ROHM Semiconductor PCB footprint - Small Outline Packages - Small Outline Packages - BD63565EFV-E2
click to zoom
3D Models
BD63565EFV-E2 - ROHM Semiconductor  - 3D model - Small Outline Packages - BD63565EFV-E2
click to zoom

BD63565EFV-E2 Details

  • Manufacturer Part Number:

    BD63565EFV-E2

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    HTSSOP-20

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    ROHM Semiconductor

  • YTEOL:

    7.75

  • Analog IC - Other Type:

    HALF BRIDGE BRUSH DC MOTOR CONTROLLER

  • JESD-30 Code:

    R-PDSO-G20

  • Length:

    6.5 mm

  • Number of Functions:

    1

  • Number of Terminals:

    20

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSSOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH

  • Seated Height-Max:

    1 mm

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    2.5 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Width:

    4.4 mm

BD63565EFV-E2 Frequently Asked Questions (FAQs)

  • ROHM provides a recommended PCB layout in the application note AN1191, which includes guidelines for thermal vias, copper pours, and component placement to minimize thermal resistance and ensure reliable operation.
  • The input capacitor selection depends on the input voltage, output current, and ripple current requirements. ROHM recommends using a low-ESR capacitor with a minimum capacitance of 10uF and a voltage rating of at least 1.5 times the input voltage. Refer to the application note AN1191 for more details.
  • The maximum output current of the BD63565EFV-E2 is 3A, but it's recommended to derate the output current based on the ambient temperature and PCB thermal design. Refer to the thermal derating curve in the datasheet to determine the maximum safe output current for your specific application.
  • To ensure stability, follow the recommended component values and PCB layout guidelines in the application note AN1191. Additionally, make sure to use a sufficient output capacitor with a low ESR and a minimum capacitance of 10uF. Avoid using ceramic capacitors with high ESL, as they can cause oscillations.
  • The EN (enable) pin is used to turn the regulator on or off. When the EN pin is pulled high (above 1.4V), the regulator is enabled, and when it's pulled low (below 0.4V), the regulator is disabled. You can use the EN pin to implement power sequencing, shutdown, or low-power modes in your design.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

BD63565EFV-E2 Overview

Use the download button to access the BD63565EFV-E2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BD635, or try a keyword search, such as Motion Control Electronics

Parts related to BD63565EFV-E2

Showing 0 results