ROHM provides a recommended PCB layout in the application note AN1191, which includes guidelines for thermal vias, copper pours, and component placement to minimize thermal resistance and ensure reliable operation.
The input capacitor selection depends on the input voltage, output current, and ripple current requirements. ROHM recommends using a low-ESR capacitor with a value between 1uF to 10uF, and a voltage rating of at least 1.5 times the input voltage. Refer to the application note AN1191 for more details.
The maximum output current of the BD82025FVJ-E2 is 2A, but it's recommended to derate the output current based on the ambient temperature and thermal design. Refer to the thermal derating curve in the datasheet to determine the maximum safe output current for your specific application.
To ensure stability, follow the recommended component values and PCB layout guidelines in the application note AN1191. Additionally, make sure to use a suitable output capacitor with a low ESR and a minimum value of 1uF. Avoid using ceramic capacitors with high ESL, as they can cause oscillations.
The typical dropout voltage of the BD82025FVJ-E2 is around 0.5V to 1.0V, depending on the output current and input voltage. Refer to the datasheet for the detailed dropout voltage characteristics.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BD82025FVJ-E2 Overview
Use the download button to access the BD82025FVJ-E2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BD820,
or try a keyword search, such as Power Management Circuits
