ROHM provides a recommended PCB layout in their application note AN1191, which includes guidelines for thermal vias, copper pours, and component placement to minimize thermal resistance and ensure reliable operation.
The input capacitor selection depends on the input voltage, output current, and ripple requirements. ROHM recommends using a low-ESR capacitor with a value between 1uF to 10uF, and a voltage rating of at least 1.5 times the input voltage. Refer to the datasheet and application notes for more detailed guidance.
The maximum output current is dependent on the ambient temperature, input voltage, and PCB layout. While the datasheet specifies a maximum output current of 0.5A, it's essential to perform thermal calculations and consider derating factors to ensure reliable operation. Consult ROHM's application notes and thermal design guidelines for more information.
To ensure stability, follow the recommended PCB layout, use a suitable input capacitor, and add a 1nF to 10nF ceramic capacitor between the VOUT and GND pins. Additionally, ensure that the output capacitor is properly selected and placed close to the regulator. Refer to ROHM's application notes and stability analysis guidelines for more details.
The typical dropout voltage for the BD90C0AWFP-CE2 is around 0.5V to 1.0V, depending on the output current and input voltage. However, this value can vary depending on the specific application and operating conditions. Consult the datasheet and ROHM's application notes for more information.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BD90C0AWFP-CE2 Overview
Use the download button to access the BD90C0AWFP-CE2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BD90C,
or try a keyword search, such as Linear Regulator ICs
