ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
To ensure stable operation, ROHM recommends a soft-start circuit to limit inrush current during power-up. Additionally, a capacitor should be placed close to the VIN pin to filter out noise and voltage spikes.
The maximum allowed voltage on the EN pin is 6V. Exceeding this voltage may damage the device. It's recommended to use a voltage divider or a level shifter if the control signal is higher than 6V.
While the BM2P0163T-Z is rated for operation up to 105°C, ROHM recommends derating the output current and voltage to ensure reliable operation in high-temperature environments. Consult the datasheet for derating guidelines.
ROHM recommends checking the input voltage, output voltage, and current consumption to identify the root cause of the issue. Additionally, verify that the PCB layout and component selection meet the recommended guidelines.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BM2P0163T-Z Overview
Use the download button to access the BM2P0163T-Z 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BM2P0,
or try a keyword search, such as Switching Regulator or Controllers
