A thermal pad on the bottom of the package should be connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
Use a low-pass filter or a ferrite bead in series with the input signal to reduce high-frequency noise and ensure stable operation.
The maximum allowable voltage on the enable pin (EN) is 6V, exceeding which may cause damage to the device.
While the device is rated for operation up to 125°C, it's recommended to derate the output current and voltage to ensure reliable operation in high-temperature environments.
Use a shielded enclosure, keep the input and output traces short and away from each other, and add a common-mode choke or ferrite bead to the output to minimize EMI.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BM2P092F-GE2 Overview
Use the download button to access the BM2P092F-GE2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BM2P0,
or try a keyword search, such as Switching Regulator or Controllers
