SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH
Seated Height-Max:
1.45 mm
Surface Mount:
YES
Terminal Form:
GULL WING
Terminal Pitch:
0.75 mm
Terminal Position:
DUAL
Width:
9.4 mm
BRD1163C-TL Frequently Asked Questions (FAQs)
Power Integrations provides a recommended PCB layout in their application notes (e.g., AN-63) and evaluation board designs. Key considerations include keeping the thermal pad connected to a solid copper plane, using thermal vias, and minimizing the distance between the device and the heat sink.
To ensure reliable start-up and operation, follow the recommended input voltage sequencing and ramp-up rates, and use a suitable input capacitor to filter out voltage transients. Additionally, consider using a voltage supervisor or reset IC to monitor the input voltage and ensure the device is properly reset during power-up.
For EMI filter design and layout, consider using a common-mode choke, Y-capacitors, and X-capacitors. Keep the EMI filter components close to the device, and use a shielded enclosure or metal can to reduce radiated emissions. Follow the guidelines in Power Integrations' application notes (e.g., AN-64) and the relevant regulatory standards (e.g., CISPR 22).
To optimize the design for high efficiency and low standby power consumption, follow the recommended component selection and layout guidelines in the datasheet and application notes. Consider using low-loss components, optimizing the transformer design, and minimizing the number of components in the standby path. Additionally, use the device's built-in features, such as burst mode and low-power modes, to reduce standby power consumption.
For high-power applications, ensure good thermal contact between the device and the heat sink, and use a heat sink with a high thermal conductivity. Consider using a fan or other cooling mechanism to reduce the device temperature. Follow the thermal management guidelines in the datasheet and application notes, and perform thermal simulations to ensure the design meets the required thermal specifications.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BRD1163C-TL Overview
Use the download button to access the BRD1163C-TL 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BRD11,
or try a keyword search, such as Motion Control Electronics
