The recommended PCB footprint for the BSS138BKW-TP is a standard SOT23-3 package with a 0.95mm x 0.95mm pad size and a 0.5mm x 0.5mm thermal pad.
To ensure proper biasing, connect the gate to a voltage source through a suitable resistor (e.g., 1kΩ to 10kΩ) and ensure the drain-source voltage is within the recommended operating range (0V to 50V).
The maximum power dissipation of the BSS138BKW-TP is 1.4W at an ambient temperature of 25°C, and it decreases as the temperature increases. Be sure to check the power derating curve in the datasheet.
Yes, the BSS138BKW-TP can be used as a switch in high-frequency circuits up to 100MHz. However, be aware of the device's parasitic capacitances and inductances, which may affect circuit performance at high frequencies.
To protect the BSS138BKW-TP from ESD, handle the device with an anti-static wrist strap or mat, and ensure the PCB has proper ESD protection circuits, such as TVS diodes or ESD protection arrays.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BSS138BKW-TP Overview
Use the download button to access the BSS138BKW-TP schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BSS13,
or try a keyword search, such as Small Signal Field-Effect Transistors
