3D Models
Note! To download footprints and symbols, use the build and request forms below
Request (48 hours)
- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for BTA16-800BW3G
- Part Number BTA16-800BW3G
- Manufacturer LITTELFUSE
- Pin Count 3
- Last Modified Date Oct 6, 2025 1:29 PM UTC
- Pinout / Pin List Click Here (Member Only)
BTA16-800BW3G Details
-
Manufacturer Part Number:
BTA16-800BW3G
-
Rohs Code:
Yes
-
Part Life Cycle Code:
Active
-
ECCN Code:
EAR99
-
Manufacturer:
Littelfuse Inc
-
YTEOL:
6
-
Peak Reflow Temperature (Cel):
NOT SPECIFIED
-
Qualification Status:
Not Qualified
-
Time@Peak Reflow Temperature-Max (s):
NOT SPECIFIED
-
Trigger Device Type:
SCR
BTA16-800BW3G Frequently Asked Questions (FAQs)
-
The recommended mounting torque for the BTA16-800BW3G is 0.6 Nm (5.3 lbf-in) for the screw terminals and 1.2 Nm (10.3 lbf-in) for the nut.
-
While the BTA16-800BW3G has a maximum junction temperature of 125°C, it's recommended to derate the device's current and voltage ratings when operating in high-temperature environments (above 85°C) to ensure reliable operation.
-
To prevent overvoltage damage, it's recommended to use a snubber circuit consisting of a resistor (Rsn) and capacitor (Csn) in series, connected in parallel with the thyristor. The values of Rsn and Csn depend on the specific application and should be calculated based on the device's dv/dt rating.
-
The recommended wire size is 14 AWG (2.5 mm²) or larger, with a insulation type that can withstand the maximum operating temperature of the device (125°C). A wire with a high-temperature rating, such as Teflon or silicone, is recommended.
-
Yes, the BTA16-800BW3G can be used in a three-phase bridge configuration, but it's essential to ensure that the device is properly rated for the specific application and that the gate drive circuitry is designed to handle the required current and voltage.
Trust Checks
Trust Score Unavailable
BTA16-800BW3G Overview
Use the download button to access the BTA16-800BW3G 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
