The recommended operating temperature range for the BU4919G-TR is -40°C to 85°C, as specified in the datasheet. However, it's essential to note that the device can tolerate a storage temperature range of -55°C to 150°C.
To ensure proper power supply, connect the VCC pin to a stable 3.3V or 5V power source, and the GND pin to a solid ground. Additionally, decouple the power supply lines with capacitors (e.g., 10uF and 100nF) to minimize noise and voltage fluctuations.
The maximum current rating for the BU4919G-TR is 100mA, as specified in the datasheet. Exceeding this rating may cause the device to overheat or malfunction.
To configure the BU4919G-TR for I2C communication, connect the SCL pin to the clock signal, and the SDA pin to the data signal. Ensure the pull-up resistors are connected to the SCL and SDA lines, and set the slave address according to the datasheet.
The RESET pin on the BU4919G-TR is an active-low input that, when pulled low, resets the device to its initial state. This pin can be used to initialize the device or recover from an error state.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BU4919G-TR Overview
Use the download button to access the BU4919G-TR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BU491,
or try a keyword search, such as Power Management Circuits
