The recommended operating voltage range for the BU94502AMUV-E2 is 1.7V to 5.5V.
To ensure the stability of the output voltage, it is recommended to use a ceramic capacitor with a capacitance of 1uF or more between the VOUT and GND pins, and to keep the output capacitor close to the VOUT pin.
The maximum output current that the BU94502AMUV-E2 can provide is 500mA.
To handle thermal considerations, it is recommended to provide a heat sink or a thermal pad on the PCB, and to ensure good airflow around the device. The maximum junction temperature should not exceed 125°C.
The EN (Enable) pin is used to enable or disable the regulator. When the EN pin is high, the regulator is enabled, and when it is low, the regulator is disabled.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BU94502AMUV-E2 Overview
Use the download button to access the BU94502AMUV-E2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BU945,
or try a keyword search, such as Other Consumer ICs
